Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- alphapocdescription [2018/10/12 15:55]
dh3wr [OTA Programming of Time and Date]
+++ alphapocdescription [2018/11/07 04:04]
oe7bsh
@@ Zeile 76: / Zeile 76: @@
 ===== Over-The-Air Programming of Time and Date  =====
-The AlphaPoc pagers (tested with AlphaPoc 602R X4 model) support setting time and date as broadcasted by DAPNET. You need to configure the 8th RIC of your pager with RIC 156866 function D / alpha. Afterwards time and date should be set automatically as soon as the OTA message is transmitted (currently happening every five minutes).
+The AlphaPoc pagers (tested with AlphaPoc 602R X4 model) support setting time and date as broadcasted by DAPNET. <del>You need to configure the 8th RIC of your pager with RIC 165866 function D / alpha.</del> With the update of October 30th RICs have changed. You choose between UTC and local time. For UTC you have to use RIC 216 function D / alpha for UTC time or RIC 224 function D / alpha for local time. Afterwards time and date should be set automatically as soon as the OTA message is transmitted (currently happening every two minutes).
 {{ :alphapoc:ota_time_alphapoc.jpg?nolink&600 |}}
+This is currently supported and tested on the following models:
+  * AlphaPoc 602R
+  * AlphaPoc 801W (see below)
+<color #ed1c24>Not</color> working:
+  * AlphaPoc 601
+To program the 801W you should use following configuration:
+{{ ::programing_801w.png?800 |}}
 ===== Detailed analysis of Hard- and Software  =====
 Jochen DG1SFJ has worked out a detailed analysis about the hard- and software used. It can be found here: [[http://www.dg1sfj.de/index.php/funk/geraete/126-alphapoc-602r|http://www.dg1sfj.de/index.php/funk/geraete/126-alphapoc-602r]]
+===== In range-Symbol  =====
+The Alphapoc 602R offers an "in range symbol":
+{{ :alphapoc:alphapoc:alpapocinrange.jpg |}}
+The symbol is not working in the current firmware (1.7x), so you have to use an older programming software 1.01 (as the firmware is transferred via software).
+===== Handling RICs  =====
+As the alphapoc pager doesn’t support rubrics (like the skyper pager), the data is transmitted via a RIC address, e.g. for weather RIC 1080.
+The messages are handled like private messages and so they fill up the memory/display. A possible solution: If you change the RIC type from „private“ to „group“, the latest message will be kept and the other (same) messages will be overwritten.
+To change the type of a RIC, you have to use the programming software. Please be aware, that only the RIC addresses 5 to 8 can be changed from „private“ to „group“.
+{{ :alphapoc:alphapoc:ricgroup.png?400 |}}
+Group messages have also another symbol on the pager display, see below:
+{{ :alphapoc:alphapoc:alphapoc-groupmsg.jpg?400 |}}
+You can use this opportunity to change the tone for the RIC to „disable“, if you prefer no sound on receiving rubric messages.

DAPNET DokuWiki

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge