Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- monitoringunipager [2018/02/26 21:42] – dh3wr
+++ monitoringunipager [2019/09/26 14:37] (aktuell) – dh3wr
@@ Zeile 6: / Zeile 6: @@
   * Websocket based with C++ programm
   * Websocket based with Python programm
+Also Daniel Dibbets DL6FZ provided a Template for Zabbix. See below for more info.
 If you have already Unipager V 1.0.0 or newer installed, the JSON output solution is highly recommended due to performance issues.
-===== Up-to-date Solution =====
+===== Up-to-date Solution with JSON Output =====
 This approach uses the same ''check_http_json'' Nagios plugin as  [[monitoringnagios|here]]. For further information on installation refere to this site. No ''nagios-nrpe-server'' is needed (although it makes sense to use it for temperature monitoring, disk space, etc.)
@@ Zeile 25: / Zeile 27: @@
         command_line    /usr/lib/nagios/plugins/check_http_json -H '$HOSTNAME$' -P $ARG1$ -p status -w queue,$ARG2$ -c queue,$ARG3$
 }
-<file>
+</file>
+  * ARG1: Port of the HTTP Server of Unipager, default is ''8073''
+  * ARG2: Number of POCSAG transmissions in queue to be exceeded for status ''warning''
+  * ARG3: Number of POCSAG transmission in queue to be exceeded for status ''critical''
+Create a service description for the new commands:
+<file>
+# Define a service to check if unipager is connected to a Node
+define service{
+        use                             generic-service-rwthafu
+        host_name                       c9000.db0sda.ampr.org
+        service_description             UniPager Connection to DAPNET Core
+        check_command                   check_unipager_connected!8073
+        }
+# Define a service to check if unipager queue is too full
+define service{
+        use                             generic-service-rwthafu
+        host_name                       c9000.db0sda.ampr.org
+        service_description             UniPager Queue
+        check_command                   check_unipager_queue!8073!100!150
+        }
+</file>
+The result should be like this:
+{{ ::monitoring:nagios_json_connection_and_queue.png?direct&800 |}}
+===== Websocket Solution =====
+{{:icons:warning.png?direct |}}{{ :icons:warning.png?direct|}}The websocket methods are superseeded by the JSON method. Please use the new one. The following documentation is for historical reasons only.
 Ein entsprechendes Plugin für die Websocket-Schnittstelle kann unter [[https://github.com/rwth-afu/UniPagerNagios|https://github.com/rwth-afu/UniPagerNagios]] heruntergeladen werden. Es gibt 2 Varianten:
@@ Zeile 44: / Zeile 68: @@
 <code>git clone https://github.com/rwth-afu/UniPagerNagios.git</code>.
-===== C++-Version =====
+==== C++-Version ====
 Mit
 <code>
@@ Zeile 61: / Zeile 85: @@
 </code>
-===== Pyhton2-Version =====
+==== Pyhton2-Version ====
-FIXME
+There is in the same Git-repository a pyhton2 version to do the same. You can find the code in ''python/check_unipager'' . The setup is almost the same as for the C++ version. As this method is overseeded by the JSON approach, there is no further documentation here for the moment.
-===== Generelle Einstellungen =====
+==== Generelle Einstellungen für NRPE ====
-Die Datei ///etc/nagios/nrpe.cfg// entsprechen anpassen, insbesondere:
+Die Datei ''/etc/nagios/nrpe.cfg'' entsprechen anpassen, insbesondere:
 <code>allowed_hosts=127.0.0.1,44.225.x.y</code>
-Die Datei ///etc/nagios/nrpe.d/check_unipager.cfg// erstellen mit Inhalt
+Die Datei ''/etc/nagios/nrpe.d/check_unipager.cfg'' erstellen mit Inhalt
 <code>sudo nano /etc/nagios/nrpe.d/check_unipager.cfg</code>
 <file>command[check_unipager]=/usr/lib/nagios/plugins/check_unipager -H localhost</file>
-ACHTUNG: Nur bei Zugriff von //localhost// aus braucht man ab der Version 0.7.1 von [[unipager|UniPager]] kein Passwort.
+ACHTUNG: Nur bei Zugriff von ''localhost'' aus braucht man ab der Version 0.7.1 von [[unipager|UniPager]] kein Passwort.
 Dann den nagios-nrpe-server neu starten:
 <code>service nagios-nrpe-server restart</code>
-Auf dem Haupt-Nagios-Server kann man dann mit den NRPE-Plugin den Status abfragen. Dazu erstellt man eine Datei in ///etc/nagios3/conf.d// mit z.B. dem Hostnamen //c9000.db0sda.ampr.org.cfg// und dem Inhalt
+Auf dem Haupt-Nagios-Server kann man dann mit den NRPE-Plugin den Status abfragen. Dazu erstellt man eine Datei in ''/etc/nagios3/conf.d'' mit z.B. dem Hostnamen''c9000.db0sda.ampr.org.cfg'' und dem Inhalt
 <file>
 define host{
@@ Zeile 100: / Zeile 124: @@
 Die hostgroup, host_name, alias und IP müssen natürlich angepasst werden. Einmal nagios neustarten und schon wird der Status überwacht.
+===== Zabbix Template for Unipager =====
+Daniel Dibbets DL6FZ provided a template for Zabbix to monitor the unipager program.
+{{ :monitoring:zbx_unipager_template.xml |Download Template here}}
+Items are observed:
+  * Connected
+  * Master
+  * Queue
+  * Version
+  * Calls RX
+  * Calls TX
+Triggers are integrated:
+  * Not Connected
+  * Queue > 500
+  * Queue > 1000
+Data is gathered from Status JSON (http://{HOST.NAME}:8073/status)
+Zabbix will build history and delta information concerning the numberical values.