Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- alphapocdescription [2018/09/03 17:40]
oe3kss
+++ alphapocdescription [2020/02/26 19:58]
oe7bsh [In range-Symbol] firmware 2.03
@@ Zeile 2: / Zeile 2: @@
 ===== Overview =====
-The Alphapoc is a portable paging receiver for POCSAG. It is avaiable at [[http://alphapoc.com/product_info.php?products_id=172|http://alphapoc.com/]]. The relevant version of the product is **X4**.
+The Alphapoc is a portable paging receiver for POCSAG. It is available at [[http://alphapoc.com/product_info.php?products_id=172|http://alphapoc.com/]]. The relevant version of the product is **X4**.
 {{ ::alphapoc:alphapoc:alphapoc6002r_cutout.jpg?direct&600 |Image of Alphapoc 602 Paging receiver}}
@@ Zeile 14: / Zeile 14: @@
 {{ ::alphapoc:alphapoc602_clip.jpg?direct&600 |Belt clip}}
-===== Basic fundamentals on RIC asssigment for Alphapoc =====
+===== Basic fundamentals on RIC assigment for Alphapoc =====
 As the AlphaPoc receivers don't have a predefined RIC, so the RIC will be assigned by the DAPNET support team, normally based on the existing CCS7 / DMR ID system. The POCSAG addresses are limited to 2^21 = 2097152, so IDs greater than the limit have to be shortened. It is not necessary to have a CCS7 / DMR ID to register a reciever on DAPNET.
-The reception of the rubrics originally designed for [[skyperdescription|Skyper]] described [[rubricactivationskyper|here]] is not as convinient on the Alphapoc as on the Skyper. But there is a workaround: The rubrics are transmitted in both Skyper format and as personal messages. The RIC used for the rubrics for this purpose is 1000 + <RUBIC Number>. So rubric number 42 is RIC 1042. You can assign up to 8 POCSAG addresses (RICs), on your Alphapoc that it listen to. It is convinient to programm you personal RIC and besides the RIC of up to 7 rubrics. So you can still receive the rubics content on the Alphapoc. A mayor drawback is, that the Alphapoc will not distinguish between thoses and really personal messages, filling up your display quite fast.
+The reception of the rubrics originally designed for [[skyperdescription|Skyper]] described [[rubricactivationskyper|here]] is not as convenient on the Alphapoc as on the Skyper. But there is a workaround: The rubrics are transmitted in both Skyper format and as personal messages. The RIC used for the rubrics for this purpose is 1000 + <RUBIC Number>. So rubric number 42 is RIC 1042. You can assign up to 8 POCSAG addresses (RICs), on your Alphapoc that it listen to. It is convenient to programm you personal RIC and additionally the RIC of up to 7 rubrics. So you can still receive the rubrics content on the Alphapoc. A major drawback is, that the Alphapoc will not distinguish between those and really personal messages, filling up your Memory quite fast (work-around: see https://hampager.de/dokuwiki/doku.php?id=alphapocdescription#handling_rics)
-How to know the rubics and their numbers?
+How to know the rubrics and their numbers?
 Log in to the DAPNET Web Interface on [[http://hampager.de/#/rubrics|http://hampager.de/#/rubrics]] and look them up. Be aware the not all numbers from 1 to 99 are present and that several rubrics are assigned to a local limited transmitter group.
@@ Zeile 33: / Zeile 33: @@
 {{ ::alphapoc:alphapoc_set_qrg_on_pager.jpg?direct&600 |Set Frequency and Baud Rate on pager}}
-On the next page set the baud rate to //1200 BPS// and the frequency to //439.9875 M//. The polarity is // NORMAL//. Program your changes and settings permanently by moving the highlight to //PROGRAM// and press the small button to confirm. Your AlphaPoc is working now. For further details on alarm sound etc. have a look on in the [[http://www.alphapoc-europe.de/media/products/Alphapoc_602R_Handprogrammierung.pdf|manual]].
+On the next page set the baud rate to //1200 BPS// and the frequency to //439.9875 M// (439.9300 M for Austria). The polarity is // NORMAL//. Program your changes and settings permanently by moving the highlight to //PROGRAM// and press the small button to confirm. Your AlphaPoc is working now. For further details on alarm sound etc. have a look on in the [[http://www.alphapoc-europe.de/media/products/Alphapoc_602R_Handprogrammierung.pdf|manual]].
@@ Zeile 72: / Zeile 72: @@
 |  7  |{{ :alphapoc:alphapoc:music7.mp3 |}}|
 |  8  |{{ :alphapoc:alphapoc:music8.mp3 |}}|
-|  Chrip  |{{ :alphapoc:alphapoc:music_chrip.mp3 |}}|
+|  Chirp  |{{ :alphapoc:alphapoc:music_chrip.mp3 |}}|
+===== Over-The-Air Programming of Time and Date  =====
+The AlphaPoc pagers (tested with AlphaPoc 602R X4 model) support setting time and date as broadcasted by DAPNET. <del>You need to configure the 8th RIC of your pager with RIC 165866 function D / alpha.</del> With the update of October 30th RICs have changed. You choose between UTC and local time. For UTC you have to use RIC 216 function D / alpha for UTC time or RIC 224 function D / alpha for local time. Afterwards time and date should be set automatically as soon as the OTA message is transmitted (currently happening every two minutes).
+{{ :alphapoc:ric224.jpg?nolink&600 |}}
+This is currently supported and tested on the following models:
+  * AlphaPoc 602R
+  * AlphaPoc 801W (see below)
+<color #ed1c24>Not</color> working:
+  * AlphaPoc 601
+To program the 801W you should use following configuration:
+{{ ::programing_801w.png?800 |}}
 ===== Detailed analysis of Hard- and Software  =====
 Jochen DG1SFJ has worked out a detailed analysis about the hard- and software used. It can be found here: [[http://www.dg1sfj.de/index.php/funk/geraete/126-alphapoc-602r|http://www.dg1sfj.de/index.php/funk/geraete/126-alphapoc-602r]]
+===== In range-Symbol  =====
+The Alphapoc 602R/802W offers an "in range symbol":
+{{ :alphapoc:alphapoc:alpapocinrange.jpg |}}
+The symbol is not working in the current firmware (1.7x), so you have to use an older programming software 1.01 (as the firmware is transferred via software). Update 2/2020: There seems to be a new software/firmware 2.03 available, antenna symbol works with it.
+===== Handling RICs  =====
+As the alphapoc pager doesn’t support rubrics (like the skyper pager), the data is transmitted via a RIC address, e.g. for weather RIC 1080.
+The messages are handled like private messages and so they fill up the memory/display. A possible solution: If you change the RIC type from „private“ to „group“, the latest message will be kept and the other (same) messages will be overwritten.
+To change the type of a RIC, you have to use the programming software. Please be aware, that only the RIC addresses 5 to 8 can be changed from „private“ to „group“.
+{{ :alphapoc:alphapoc:ricgroup.png?400 |}}
+Group messages have also another symbol on the pager display, see below:
+{{ :alphapoc:alphapoc:alphapoc-groupmsg.jpg?400 |}}
+You can use this opportunity to change the tone for the RIC to „disable“, if you prefer no sound on receiving rubric messages.
+===== empty battery indicator  =====
+{{:alphapoc:emptybattery.jpg|}}
+If the battery is empty, the "empty battery" icon appears, an audio alert beeps and **no further messages** will be received.

DAPNET DokuWiki

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge