DAPNET DokuWiki

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.
====== Notification to Pager from Nagios via UniPager ======

There is a possibility to send notification to a pager via the DAPNET-Core. Look [[nagiosnotification|here]]. However, if in case of a failure the DAPNET-Core is not reachable, you may want to send a paging call directly via your unipager.


FIXME UNTESTED

===== Installation =====
Get the python script from [[https://github.com/dh3wr/UniPager-SendWebsocket|https://github.com/dh3wr/UniPager-SendWebsocket]]. Copy the file ''unipager_send.py'' to ''/usr/local/bin'' or whereever you want it to be.

===== Define commands to send paging calls =====
Edit ''commands.cfg'' and add the following lines:
<code>
# 'notify-host-by-pager' command definition
define command{
        command_name    notify-host-by-pager-on-unipager
        command_line    /usr/bin/python /usr/local/bin/unipager_send.py --hostname $USER14$ --password $USER15$ --ric $$ --msg "NAGIOS $NOTIFICATIONTYPE$: $HOSTNAME$ $HOSTSTATE$"
        }

# 'notify-service-by-pager' command definition
define command{
        command_name    notify-service-by-pager-on-unipager
        command_line    /usr/bin/python /usr/local/bin/unipager_send.py --hostname $USER$ --password $USER$ --ric $address2$ --msg "NAGIOS $NOTIFICATIONTYPE$: $HOSTNAME$ $SERVICEDESC$ $SERVICESTATE$"
        }

</code>

===== Define UniPager hostname and password =====
As you see, there are macros ''$USER13$'' and ''$USER14$'' used. They should contain the hostname of the Unipager and the password, if defined. Define them in the ''resource.cfg'':
<code>
$USER13$=unipager.yourdomain.com
$USER14$=VERYSCECRETPASSWORD
</code>

===== Setup contacts =====
Edit ''contacts.cfg'' and add the pager subscriber as set in DAPNET and the notification commands:
<code>
define contact{
        contact_name                    dh3wr
        alias                           Ralf Wilke
        service_notifications_enabled   1
        host_notifications_enabled      1
        service_notification_period     24x7
        host_notification_period        24x7
        service_notification_options    w,u,c,r
        host_notification_options       d,r
        service_notification_commands   notify-service-by-email,notify-service-by-pager-on-unipager
        host_notification_commands      notify-host-by-email,notify-host-by-pager-on-unipager
        email                           spam@myemail.cl
        pager                           dh3wr
        address1                        dl-nw
        address2                        123456
        }

</code>
The ''address2'' entry defines the RIC to send the message to. Remember to add the commands just created.

===== Assign the contact to the host or service =====
Either use the template or define at each host and service the contacts you want to notify.
<code>
define host{
        name                            generic-host-rwthafu    ; The name of this host template
        notifications_enabled           1       ; Host notifications are enabled
        event_handler_enabled           1       ; Host event handler is enabled
        flap_detection_enabled          1       ; Flap detection is enabled
        failure_prediction_enabled      1       ; Failure prediction is enabled
        process_perf_data               1       ; Process performance data
        retain_status_information       1       ; Retain status information across program restarts
        retain_nonstatus_information    1       ; Retain non-status information across program restarts
        check_command                   check-host-alive
        max_check_attempts              10
        notification_interval           0
        notification_period             24x7
        notification_options            d,u,r
        contacts                        rwthafu,dh3wr
        register                        0       ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
        }
</code>
DAPNET DokuWiki

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Seiten-Werkzeuge
