Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- unipagernextion [2018/08/12 23:27]
dh3wr [Direct connection to GPIO UART]
+++ unipagernextion [2018/08/12 23:28]
dh3wr [Direct connection to GPIO UART]
@@ Zeile 88: / Zeile 88: @@
 {{::icons:warning.png?direct |}}{{ :icons:warning.png?direct|}}Remember: In the default raspbian image, on Raspberry Pi 3B and Raspberry Pi 3B+, the internal Bluetooth is connected to the internal UART. So as it is quite likely you won't use the Bluetooth, disable it by adding a line
 <code>dtoverlay=pi3-disable-bt</code> to ''/boot/config.txt'' and disable the Bluetooth service with
-<code>sudo systemctl disable hciuart</code>.
+<code>sudo systemctl disable hciuart</code>
 Also free the UART from the kernel messages by removing
 <code>console=serial0,115200</code> from ''/boot/cmdline.txt'' and enable the UART by adding
-<code>enable_uart=1</code> to ''/boot/config.txt''.
+<code>enable_uart=1</code> to ''/boot/config.txt''
 Further information is just one google search away: [[https://www.raspberrypi.org/documentation/configuration/uart.md|one google search away]].
-Reboot your Pi after doing so.
+Reboot your Pi after doing these actions.

DAPNET DokuWiki