Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- raspagerc9000 [2018/10/10 08:00] – [Front Panel LEDs] df2et
+++ raspagerc9000 [2026/01/30 13:13] (aktuell) – Fix urls dj7lc
@@ Zeile 211: / Zeile 211: @@
 </code>
-Change the part where the localhost entry is given a a useful name of your C9000. The example here is ''c9000.db0sda.ampr.org''.
+Change the part where the localhost entry is given a a useful name of your C9000. The example here is ''c9000.db0sda.hamnet.radio''.
 <file>
 # a simple host tree
-[c9000.db0sda.ampr.org]
+[c9000.db0sda.hamnet.radio]
     address localhost
     use_node_name yes
@@ Zeile 318: / Zeile 318: @@
 #contact.nagios.command /usr/bin/send_nsca nagios.host.comm -c /etc/nsca.conf
-[c9000.db0sda.ampr.org]
+[c9000.db0sda.hamnet.radio]
     address localhost
     use_node_name yes
@@ Zeile 331: / Zeile 331: @@
 # telnetting to localhost, port 4949
 #
-host_name c9000.db0sda.ampr.org
+host_name c9000.db0sda.hamnet.radio
 </file>
@@ Zeile 372: / Zeile 372: @@
 # telnetting to localhost, port 4949
 #
-host_name c9000.db0sda.ampr.org
+host_name c9000.db0sda.hamnet.radio
 # A list of addresses that are allowed to connect.  This must be a
@@ Zeile 578: / Zeile 578: @@
 define service{
         use                             generic-service-rwthafu
-        host_name                       c9000.db0sda.ampr.org
+        host_name                       c9000.db0sda.hamnet.radio
         service_description             PA Temperature
         check_command                   check_nrpe_1arg!check_PA_temp
@@ Zeile 586: / Zeile 586: @@
 define service{
         use                             generic-service-rwthafu
-        host_name                       c9000.db0sda.ampr.org
+        host_name                       c9000.db0sda.hamnet.radio
         service_description             C9000 Temperature
         check_command                   check_nrpe_1arg!check_C9000_temp
@@ Zeile 620: / Zeile 620: @@
 https://github.com/phl0/C9000PADummyDisplay
-The author has some PCBs to sell at cose. Please contact DF2ET if you are interested.
+The author has some PCBs to sell at cost. Please contact DF2ET if you are interested.
 The 7-segement display is supported by the C9000PADummy Arduino code. To activate it you have to compile the code with