Benutzer-Werkzeuge

Webseiten-Werkzeuge


faq

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
faq [2020/11/09 14:15]
dh3wr [Why can't I use my DMR ID as RIC?]
faq [2023/08/01 15:07] (aktuell)
oe7bsh [My transmitter is connected to the server but listed as offline?]
Zeile 9: Zeile 9:
  
 ===== Why can't I use my DMR ID as RIC? ===== ===== Why can't I use my DMR ID as RIC? =====
-The maximum value for a RIC is limited to 2^21 = 2097152. Thus for example German DMR IDs (262xxxx/​263xxxx) are out of range. Due to this we have to derive a RIC from that+The maximum value for a RIC is limited to 2^21 = 2097152. Thus for example German DMR IDs (262xxxx/​263xxxx) are out of range. Due to this we have to derive a RIC from that. For example cutting the first digit or replacing single digits with 0. 
-For German amateur radio participants we replace the MCC 262 with 202. This a DMR ID of 2621234 becomes RIC 2021234. This obviously only works in cases were the RIC is not already taken otherwise. +
-For other international DMR IDs that do not fit into the RIC range we use other methods to derive the RIC. For example cutting the first digit or replacing single digits with 0. +
 As long as it is not already taken by someone else you are always free to suggest a RIC that we can assign to you. Please be aware that there are receivers with fixed RICs. People with such hardware always take precedence. As long as it is not already taken by someone else you are always free to suggest a RIC that we can assign to you. Please be aware that there are receivers with fixed RICs. People with such hardware always take precedence.
  
Zeile 90: Zeile 88:
 ===== In the statistics, I see almost 60 % of all transmitters offline. Is your network mostly not working? ===== ===== In the statistics, I see almost 60 % of all transmitters offline. Is your network mostly not working? =====
 No. The offline transmitters are registred in DAPNET, but not online at the moment. There are a lot of transmitters registered where we don't know the actual status of setup. There may be several transmitters that were registered for test reasons, but never really used. There is an automatic algorithm that deletes transmitters that have not been online for three month. But we don't have any means to distinguish between intentionally offline transmitters and non-intentionally offline transmitters. No. The offline transmitters are registred in DAPNET, but not online at the moment. There are a lot of transmitters registered where we don't know the actual status of setup. There may be several transmitters that were registered for test reasons, but never really used. There is an automatic algorithm that deletes transmitters that have not been online for three month. But we don't have any means to distinguish between intentionally offline transmitters and non-intentionally offline transmitters.
 +
 +===== My transmitter is connected to the server but listed as offline? =====
 +
 +{{:​offline.jpg?​100|}}
 +
 +Sometimes there are sync errors between master server and transmitters. To solve the problem, try to save the transmitter config, which should fix the problem.
  
 ===== Is there an SMTP-Interface to DAPNET, so I can send calls with my email program? ===== ===== Is there an SMTP-Interface to DAPNET, so I can send calls with my email program? =====
faq.1604927740.txt.gz · Zuletzt geändert: 2020/11/09 14:15 von dh3wr